My studio glass is wrongly assembled

If the lighting glass of your studio is wrong assembled by accident, you can reassemble it by 

yourself very easily. Below you will find the steps on how to do this. 

Which equipment do I need? 

- A screwdriver with a crosshead

Step 1: Unscrew the 4 screws which are indicated in red by using a screwdriver

Step 2: When these are unscrewed, you can carefully lift the glass

Step 3: When the glass is removed, you will see the inside of the APIC studio, be careful and don't touch the inside. 

Step 4: Turn the glass as shown in the picture below to give the camera a clear view, as it should be. 

Step 5: Screw in the 4 screws. ATTENTION: fixed is fixed, do not screw the screws more than necessary.

Your studio is ready for use again!